Terminators, Connecting the scsi – Epson ES-1200C User Manual
Page 23
Advertising
The scanner has a built-in terminator. If the scanner is the only
SCSI device you connect to your computer or if it is the last
device in the daisy chain, leave the internal SCSI terminator
turned on. It is on if the switch is up.
If the scanner is in the middle of a daisy chain, turn the
terminator switch off.
Do not use an external terminator.
Connecting the SCSI
Connect the scanner with the SCSI as follows:
1. See that the scanner, the computer, and all other SCSI
devices are turned off and unplugged from the power
source.
1-10
Setting Up the Scanner
Advertising