Epson ES-1200C - Manual (Page 44)

Replacing the fluorescent lamps
The luminosity of the fluorescent lamps declines over time. If
the lamps break or become too dim to operate normally, the
scanner stops working and both the READY light and the
ERROR light flash. When this happens, the lamp assembly
must be replaced. For details, contact your dealer.
Warning:
Never open the case of the scanner. If you think repairs or
adjustments are necessary, consult your dealer.
Transporting the Scanner
When you transport the scanner a long distance or store it for
an extended period, follow the steps below to secure the
carriage.
1. Turn on the scanner and wait until the carriage moves to the
home position (the back of the scanner). Then turn off the
scanner.
2. Push in the transportation screw and turn it clockwise to
secure the carriage.
Scanner Basics 2-19