Epson ES-1200C - Manual (Page 74)

The data produced by the scanner needs to be reproduced to be
seen as an image. This is done, for example, by displaying the
image data on a computer screen or printing it on a printer. The
same image data can appear different depending on how it is
reproduced. The various scanner functions aid in providing
optimum reproduction results by adjusting the way the image
is captured and converted into image data.
Scanner settings
The table below summarizes the scanner functions and the
settings available on your scanner. Each of them is explained in
the following pages. All of these functions are controlled by the
software commands from your scanner software.
Resolution 29 settings from 50 to 2400 dpi
size
Data format
Color mode
1 to 8
Captures up to 10 bits/pixel/color. When captures
over 8 bits, it converts the information to 8
Color line sequence mode, color page sequence
mode and monochrome mode (dropout color
selectable)
Brightness 7 levels
mode 3 modes and disabled
4 patterns
Gamma correction 5 for output devices plus 1 user-defined
Color correctlon 4 settings for output devices plus 1 user-defined
You may need to do some trials by yourself to find out your
preferred settings because the original images and the output
methods you use can vary greatly.
Appendix A-3