Caution, Setting self clean with a delayed start, During self clean – LG 30 Inch Double Oven Gas Range Owners Manual User Manual

Page 48: After the self clean cycle

Advertising
background image

48

MAINTENANCE

CAUTION

Do not force the oven door open when the lock

icon is displayed. The oven door remains locked

until the oven temperature has cooled. Forcing

the door open will damage the door.

Setting Self Clean with a Delayed

Start

1

Remove all racks and accessories from the

oven.

2

Touch

Self Clean

. The oven defaults to the

recommended three-hour self clean for a

moderately soiled oven. Touch twice for a

four-hour self clean or three times for a two-hour

self clean.

3

Touch

Start Time

.

4

Use the number keys to enter the time of day

you would like the Self Clean to start.

5

Touch

Start

.

NOTE

It may become necessary to cancel or interrupt a

Self Clean cycle due to excessive smoke or fire in

the oven. To cancel the Self Clean function, touch

Clear/Off

.

During Self Clean

The Self Clean cycle uses extremely hot

temperatures to clean the oven cavity. While

running the Self Clean cycle, you may notice

smoking or an odor. This is normal, especially if the

oven is heavily soiled.

As the oven heats, you may hear sounds of metal

parts expanding and contracting. This is normal

and will not damage the oven.

Do not force the oven door open when the lock

is displayed. The oven door remains locked until

the oven temperature has cooled. Forcing the door

open will damage the door.

After the Self Clean Cycle

The oven door remains locked until the oven

temperature has cooled.

You may notice some white ash in the oven. Wipe it

off with a damp cloth or a soap-filled steel wool pad

after the oven cools. If the oven is not clean after

one self-clean cycle, repeat the cycle.

If oven racks were left in the oven and do not slide

smoothly after a self-clean cycle, wipe racks and

rack supports with a small amount of vegetable oil

to make them glide more easily.

Fine lines may appear in the porcelain because it

went through heating and cooling. This is normal

and will not affect performance.

NOTE

The Self Clean cycle cannot be started if the

Lockout feature is active.

Once the Self Clean cycle is set, the oven door

locks automatically. You will not be able to open

the oven door until the oven is cooled. The lock

releases automatically.

Once the door has been locked, the lock

indicator light stops flashing and remains on.

Allow about 15 seconds for the oven door lock

to activate.

If the clock is set for a 12-hour display (default)

the Delayed Self Clean can never be set to

start more than 12 hours in advance.

Advertising