Smart diagnosis, Using smart diagnosis, 56 using smart diagnosis – LG 30 Inch Double Oven Gas Range Owners Manual User Manual

Page 56

Advertising
background image

56

SMART DIAGNOSIS™

SMART DIAGNOSIS™

Should you experience any problems with your range,

it has the capability of transmitting data to your smart

phone using the LG Smart Oven application or via

your telephone to the LG call center.
Smart Diagnosis™ cannot be activated unless your

range is turned on by touching the

Start

button. If

your range is unable to turn on, then troubleshooting

must be done without using Smart Diagnosis™.

Using Smart Diagnosis™

Smart Diagnosis™ Using Your Smart

Phone

1

Download the LG Smart Oven application on

your smart phone.

2

Open the LG Smart Oven

application on your

smart phone. Touch Smart Diagnosis™ button to

advance to the next screen.

3

Follow directions of the application. Using ‘Tag

on’ is recommended but, if it does not work well,

the application will show how to use Audible

Diagnosis.

4

Touch [ ] in the LG Smart Oven application

for a more detailed guide on how to use the Tag

On function.

NOTE

Call quality differences by region may affect the

function.

Use the home telephone for better

communication performance, resulting in better

service.

Bad call quality may result in poor data

transmission from your phone to the machine,

which could cause Smart Diagnosis™ to

malfunction.

Smart Diagnosis™ Through the Call

Center

1

Call the LG call center at: (LG U.S.) 1-800-243-

0000 (LG Canada) 1-888-542-2623.

2

When instructed to do so by the call center

agent, hold the mouthpiece of your phone over

the Smart Diagnosis™ logo on the machine.

Hold the phone no more than one inch from (but

not touching) the machine.

NOTE

Do not touch any other buttons or icons on the

display screen.

3

Touch and hold the

Start

button for three

seconds.

4

Keep the phone in place until the tone

transmission has finished. This takes about 6

seconds and the display will count down the

time.

5

Once the countdown is over and the tones have

stopped, resume your conversation with the call

center agent, who will then be able to assist you

in using the information transmitted for analysis.

NOTE

For best results, do not move the phone while

the tones are being transmitted.

If the call center agent is not able to get an

accurate recording of the data, you may be

asked to try again.

Advertising