Epson EB-G5200W - Manual (Page 111)

111 Reading Problem Mail Notification Function
When the Mail Notification function is set to "On" and a problem/
warning occurs in the projector, the following e-mail is sent.
Subject: EPSON Projector
Line 1: The name of the projector where the problem has occurred
Line 2: The IP address set for the projector where the problem has
occurred.
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The following table
shows the details that are given in the message for each item.
To deal with problems/warnings, see "Reading the Indicators"
(s
p.67 ).
Message Cause
Internal error Internal Error
Fan related error Fan Error
Sensor error Sensor Error
Lamp cover is open. Lamp Cover Open
Lamp timer failure Lamp Failure
Lamp out Lamp Error
Power Err. (Ballast) Power Err. (Ballast)
Internal temperature error
High Temp Error
(Overheating)
High-speed cooling in progress High Temp Warning
Lamp replacement notification Replace Lamp
No-signal
No Signal
No Signal is input to the projector.
Check the connection status or check
that the power for the signal source is
turned on.
A (+) or (-) appears at the start of the message.
(+): A projector problem has occurred
(-): A projector problem has been dealt with