Epson EB-G5200W - Manual (Page 24)

Functions for Enhancing Projection 24
f Changing the aspect for computer images/HDMI images (For EB-G5350/G5300/G5150/G5100 only)
You can change projections of computer images or images input from the HDMI input port as follows.
Set Values Operation Projection example
Normal When images are
input from the
Computer1/2 or
BNC input ports Projects to the full projection size retaining the
aspect of the input image.
Auto When images are
input from the
HDMI input port Projects in an appropriate aspect based on
information from the signal being input.
4:3 Projects to the full projection size at an aspect of
4:3. This is ideal for when you want to project
images at an aspect of 5:4 (1280 ^ 1024) to the
full projection size. When a 1280 ^ 1024 signal is input
16:9 Projects at a 16:9 aspect. This is ideal for
projecting at full screen size when using a 16:9
screen. When a 1280 ^ 1024 signal is input
Through Projects at the resolution of the input image size
to the center of the screen. This is ideal for
projecting clear images.
If the image resolution exceeds 1024 ^ 768, the
edges of the image are not projected. When an 800 ^ 600 signal is
input
When a 1400 ^ 1050 signal is
input
Normal 4:3