Epson 4003353 User Manual
Page 58
2.4.1.9 Ink Cartridge Replacement Operation
operation is
the
pressed for
3 seconds; the carriage
then moves to the ink cartridge
position.
1.
When paper is loaded, ejects the paper; if paper
age
2.
Moves the carriage to the carriage replacement position.
3. The
printer enters the
exchanging state. (The printer
in this state until the
button
is pressed or until 10
elapse.) While the printer is m this waiting status,
performs the following step
and then advances to step 4.
3-1. Performs the
flushing operation every 5
(blackhead only).
The
sequence of steps performed after the
replaced depends on the printer status:
Replacement complete
UC In
Replacement not complete
Ink cartridge in after exchange
1
➤
l/C Out
out after
Figure 2-32. Ink Cartridge Replacement Classification
(1) Normal Mode
4. Depending on whether the I/C is
performs theabsorbing operation for the
color head (see A or B).
5. Dependingon whether the
I/C
for the
black head (see A or B).
A-1.
the wiping operation 1.
A-2. Sets the D/E lever (pump
sion on).
A-3. Performs the
absorption.
A-4. Pauses the printer for 3
A-5.
the ink absorption.
A-6.
Performs the negative
A-7. Performs
micro
operation.
A-8.
the fail absorbing operation (including the D/E lever set operation).
A-9. Performs the wiping
(including the flushing operation).
B (1/C Out):
.,
B-1. Performs the micro absorption
g
operation
B-2. Moves the carriage to the home
B3. Waits
print data.
(2) No I/CMOde
4. Sets the
5. Turns on the No Ink Cartridge LED.
6. Pauses the printer.
(3) PAUSE Mode
4.
Performs the flushing operation and then moves the carriage to the home
5. Sets
the
carriage
6.
Pauses the printer.
2-2a
Rev.