Epson 4003353 - Manual (Page 88)

Stylus Color Manual
Adjustments
After replacing the angular spacer, reassembly the ink cartridge holder and reinstall the ink
cartridges. Use the BASIC program to head angle. Confirm the angle
condition by re-performing the step 1 to and if the angle condition is wrong you must
perform this adjustment until the head angle becomes correct.
angular spacer comes in thicknesses. Until the black head angle is correct,
II
perform
this adjustment by changing the angular spacer.
When setting the angular spacer, always set the angular spacer on the linear spacer.
Carriage Unit
Figure 4-7. Spacer
(Spacer
Angular
o
1
Push
Base Head
I I
Spacer Lin
I
S p a c e r A n g u l a r
ear
o
Angular Replacement Position)
Replacement Method
4-8
Rev. D