Epson 4003353 - Manual (Page 77)

Disassembly and Assembly Stylus Color Manual
3.2.5.7 Carriage Home Position Sensor Removal
1. Remove mechanism. (See section 3.2.4.)
2. the sensor cable from the home position sensor.
3. Unhook the 3 notches securing the carriage home position sensor to the upper frame. Then
remove the carriage home position sensor.
Sensor Cable
Figure 3-16. Carriage Home Position Sensor Removal
3.2.5.8 PE Sensor Removal
1. Remove mechanism.
2. Disconnect the connector the PE sensor.
3. Rotate the printer mechanism upside down; use tweezers to release the 2 hooks securing the
PE sensor to the paper feed roller assembly; then remove the PE sensor.
Bottom Frame
I
Figure 3-17. PE Sensor Removal
3-14
Rev. A