Epson 4003353 User Manual
Page 66
Disassembly and Assembly
Stylus Color Service Manual
3.2.1
Upper Case Removal
1.
Remove the printer cover by releasing the 2 tabs holding it to the upper case.
2. Remove the paper support by releasing the tabs
to the
case.
Remove the paper guide
move
the carriage to the
center while you pressing the
lock lever.
Remove the control
by
a
the
upper case, as shown
At
connector on the
board.
Figure 3-2. C137 PNL
Control Panel
Removal
Remove the
screw securing the uppercase to the
case.
6. Release 1 tab by inserting a flathead screwdriver into the holes at the bottom of the lower case,
as shown in the figure below.
7. Remove the uppercase by lifting the front side.
B]
Hold the upper
and pull
to remove it, while you release the tabs.
Figure 3-3. Upper Case Removal
3-3
Rev. B