Edelbrock 1997 User Manual

Edelbrock For the car

Advertising

• Please study these instructions carefully before installing your

new Throttle Kicker kit. If you have any questions or problems, do
not hesitate to contact our

Technical Hotline at: (800) 416-

8628 from 7:00 am to 5:00 pm, Monday through Friday, Pacific

Standard Time or e-mail us at:

[email protected].

• APPLICATIONS

Edelbrock Throttle Kicker Bracket #1997 is an adapter to connect a
factory vacuum operated throttle kicker to Edelbrock Q-Jet

carburetor #1903. This applies to 1980-1985 350, 400 and 454
c.i.d. engines in 3/4 and one-ton trucks with heavy duty chassis
and hot air choke. If original equipment carburetor has factory
cruise control, use the original stud and nut instead of included
hardware. Figure 1 shows typical installation on Q-Jet carburetor

#1903.

• INSTALLATION

Install bracket over carburetor throttle arm stud as shown in
Figure 1. Use bolt, nut and washer supplied to attach.

THROTTLE KICKER BRACKET

Catalog #1997

for Edelbrock Performer Series Q-Jet

Carburetor #1903

Figure 1

Throttle Kicker Bracket installed on Edelbrock

Performer Q-Jet carburetor #1903 viewed from left

(driver's) side.