Installation, Positioning the projector, Adjustable feet – Eiki LC-SD15 User Manual

Page 13

Advertising
background image

13

Installation

Projection angle can be adjusted up to 7.0 degrees with the
adjustable feet.

Lift the front of the projector and pull the feet lock latches in
each side of the projector upward.

1

Adjustable Feet

Feet Lock Latches

Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to a proper height, and tilt.

2

To retract the adjustable feet, lift the front of the projector
and pull and undo the feet lock latches.
Keystone distortion of the projected image can be corrected
by Menu Operation. (p22, 38)

3

Adjustable Feet

Note:

• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.
• The values shown above are approximate and may vary from the actual sizes.

Positioning the Projector

Installation

40”

100”

150”

200”

169”

127”

83”

34”

21.3' (6.5m)

16.1' (4.9m)

10.6' (3.2m)

4.3' (1.3m)

Max. Zoom

Min. Zoom

A : B = 9 : 1

Screen Size

(W x H) mm

4 : 3 aspect ratio

Zoom (min)

34”

Zoom (max)

691 x 518

4.3' (1.3m)

––-––

40”

813 x 610

4.9' (1.5m)

4.3' (1.3m)

100”

2032 x 1524

12.5' (3.8m)

10.6' (3.2m)

150”

3048 x 2286

19.0' (5.8m)

16.1' (4.9m)

200”

4064 x 3048

––-––

21.3' (6.5m)

(Inch Diagonal)

This projector is designed to project on a flat projection surface and can focus from 4.3’(1.3m) - 21.3’(6.5m). Refer to the
figure and table below for the screen size and distance between the projector and the screen.

(Center)

Advertising