Eiki LC-SD15 - Manual (Page 34)

34
Video Input
Press the MENU button to display the On-Screen Menu.
Press the Point
7 8 buttons to move the red frame pointer
to the Image Select Menu icon.
1
2 Press the Point d button to move the red frame pointer to
the desired level and then press the SELECT button.
Move the red frame pointer to a
desired level and press the SELECT
button.
The image level being selected.
Image Select Menu
Normal picture level preset on this projector.
Standard
Picture level adjusted for the picture with fine tone.
Cinema
Blackboard(Green)
User preset image in the Image Adjust Menu (p35, 36).
Image1~4
Image Select
Menu icon
Select a desired image level among Dynamic, Standard, Cinema,
Blackboard (Green), Image 1, Image 2, Image 3, and Image 4 by
pressing the IMAGE button on the remote control.
Normal picture level preset on this projector.
Standard
Picture level adjusted for the fine tone picture.
Cinema
Blackboard(Green)
User preset image in the Image Adjust Menu (p35, 36).
Image 1~4
IMAGE button
Dynamic
Cinema
Image 1
Image 2
Image 3
Image 4
Image Level Selection
Direct Operation
Menu Operation
Picture level suitable for the image projected on a blackboard. This
mode helps to enhance the image contrast projected on the
blackboard. This is mainly effective on a green colored board, not
truly effective on a black colored board.
Picture level suitable for the image projected on a blackboard.
See above for further details.
Blackboard(Green)
Picture level suitable for viewing a picture in a bright room.
Dynamic
Picture level suitable for viewing a picture in a bright room.
Dynamic
Standard
Remote Control
IMAGE
button