Eiki LC-SD15 - Manual (Page 28)

28
Computer Input
Press the SELECT button to display the Display area dialog box
and select the resolution.
Display area
Adjust the horizontal area displayed by the projector. Press the
Point
7 8 buttons to decrease/increase the value and then press
the SELECT button.
Display area H
Adjust the vertical area displayed by the projector. Press the Point
7 8 buttons to decrease/increase the value and then press the
SELECT button.
Display area V
With this function on, SXGA image is fully displayed at 4 : 3 aspect
ratio. It is displayed at 5 : 4 aspect ratio with this function off.
Full screen
Reset
Store
Exit the PC Adjust Menu.
Quit
To store adjusted data, move the red frame pointer to the Store
icon and then press the SELECT button. Move the red arrow
pointer to any of Mode 1 to 5 in which you want to store and then
press the SELECT button.
To reset the adjusted data, select Reset and press the SELECT
button. The confirmation box will appear and then select [Yes]. All
adjustments return to their previous figures.
Mode free
Vacant Values of “Total dots”,
“Horizontal”, “Vertical”,
“Display area H”, and
“Display area V”.
Close this dialog box.
To clear adjusted data
To store adjusted data
To clear the adjusted data previously set, move the red frame
pointer to the Mode free icon and then press the SELECT button.
Move the red arrow pointer to the Mode that you want to clear
and then press the SELECT button.
Display area
Press the SELECT button at
the Display area icon to display
the Display area dialog box.
This Mode has the parameters being stored.
✔
Note:
• Auto PC Adjustment, Display area, Display area (H/V), and Full screen cannot be
selected when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC
System Menu (p25).
The confirmation box
will appear and then
select [Yes].
The confirmation box
will appear and then
select [Yes].