English – haier CHDE5300AW User Manual
Page 12
English
Following are instructions concerning and the minimum clearances required for
any closet, recessed area, or customized under-counter installation:
• Additional distances facilitate installation and servicing.
• Addtional clearances might be required for wall, door and floor moldings.
• Additional distances of 1 in. (25.4mm) on all sides of the dryer is
recommended to reduce noise transfer.
• For closet installation with a door, minimum ventilation openings in the top
and bottom of the door are required. Louvered doors with equivalent ventilation
openings are acceptable. Companion appliance spacing should be
considered.
LOCATION OF YOUR DRYER IN A CLOSET OR RECESSED AREA
11
32.5"
1
5
"
1"
3"
( 5.4mm)
2
( mm)
(825mm)
(3
8.
1m
m
)
3"
(76mm)
3"
(76mm)
60"
2
（
）
387.1cm
2
60"
2
（
）
387.1cm
2
76