haier CHDE5300AW - Manual (Page 31)

HDE/HDG 5300AW, CHDE5300AW
1. Touch power On pad to power on.
2. Touch “Manual Dry Cycles” pad and select Timed Dry cycle, Speed Dry
or Touch Up cycles.
3. Touch “More Time” and “Less Time” pads to set a suitable time.
• After setting you can press either of these two pads to increase or
decrease drying time as you desire.
4-6. Touch pads “Temperature,” “Signal,” “Wrinkle Saver,” to define your desired
program.
NOTE: For “Manual” program, use of pads “Temperature,” “Signal,” “Wrinkle
Saver,” is the same as for auto-programs. “Anti-Bacterial”, “Damp Dry”
and “Dry Level” are inactive, and 2 beeps will sound if touched.
7. Touch “Start/Pause” pad to activate cycle.
MANUAL DRY CYCLE
English
30