haier CHDE5300AW - Manual (Page 32)

HDE/HDG 5000AW, CHDE5000AW
1. Press power ON button to power on. The control panel will beep once and
the dryer will change from “OFF” to the operating status. If Start/Pause button
is not pressed in five minutes after powering on, the dryer will automatically
return to OFF status.
2. Set the cycle select dial to Manual Dry Cycle.
3. Press “More or Less Time” button to set the required drying time.
4-6. Press “Temperature,” “Signal,” “Wrinkle Saver,” to define the required
programs.
NOTE: For “Manual Dry” program use of “Temperature,” “Signal,”
“Wrinkle Saver,” is the same as for auto-programs. “Anti-Bacterial,”
“Damp Dry Signal” and “Dry Level” are inactive, and 2 beeps will
sound if pressed.
7. Touch “Start/Pause” button to activate cycle.
MANUAL DRY CYCLE
RACK DRY CYCLE
31
English
HDE/HDG 5300AW, CHDE5300AW
1. Touch power On pad to power on.
2. Touch “Manual Dry Cycles” pad and select Rack Dry.
3. Touch “Temperature” pad to a suitable temperature.
4. Touch “More Time” and “Less Time” pads to set a suitable time.
5. Touch “Start/Pause” pad to activate.