haier CHDE5300AW - Manual (Page 29)

English
7. Touch “Anti Bacterial” pad.
• This function can be selected only in certain cycles. Here the heat temp is
raised to the highest dry level. This option can only be used with heavy,
bulky items, white and normal cycle.
NOTE: Can not use on delicate fabrics
8. Touch “Damp Dry Signal”
• If activated the dryer will beep when the load is approximately 80% dry.
This will allow you to remove lightweight or other items that you may wish
to iron.
9. Touch “Start/Pause” pad
• When starting the machine, first close the door and then touch this pad.
• If pause is needed during machine operating, touch this pad. Touching
again will resume operation.
28
• s i h T convenient feature helps keep wrinkles from setting when you cannot
unload the dryer at the end of a cycle. The dryer will stop and then tumble
for a brief period every few minutes. Press the wrinkle saver button to
activate. Stop the setting at any time by pressing the wrinkle saver button or
opening the dryer door. This feature will work for 1 hour after the drying
28
Wrinkle
saver
Anti
bacterial
Signal
Damp
signal
Air Dry
*
*
*
*
*
*