HP rx3000 Series - Manual (Page 266)

Managing the Battery
User’s Guide 10–7
Charging with the Desktop Cradle and
AC Adapter
Use the Desktop Cradle to:
■ Charge the HP iPAQ.
■ Synchronize the HP iPAQ with your computer.
(For information on synchronizing, refer to
Chapter 3, in
section “Synchronizing with Your Computer.” )
To charge the HP iPAQ using the desktop cradle:
1. Plug the AC adapter into an electrical outlet 1 and connect
the other end of the AC adapter to the AC connector on the
desktop cradle 2.
2. Slide the bottom of your HP iPAQ into the cradle 3 and push
firmly to seat it.
Ä CAUTION: To avoid damaging your HP iPAQ or the cradle, check to
be sure the HP iPAQ and cradle connectors are properly aligned before
pushing the HP iPAQ into the cradle.