HP FACSIMILE MACHINE HP FAX-700 - Manual (Page 186)

Problem Resolution 5Ć11
Table 5-1. Information Codes on the HP FAX-700 and FAX-750 (Continued)
Info
Code
Mode Description of the Problem Action
453 Not used
454 Tx
NonĆECM
After sending a post message command
and reception of PIP/PIN signals, received
a command from the remote party within
T3" time, but it was not the DIS comĆ
mand
Line condition may be bad. Resend fax
455 Not used
456 Not used
457 Not used
458 Tx
NonĆECM
Did not receive appropriate response
(OIN/PIP/MCF/RTP/RTN) from the remote
party after sending the EOM signal to it
Line condition may be bad. Resend fax
459 Not used
460 Not used
461 Not used
462 Not used
463 Not used
464 Not used
465 Tx
NonĆECM
Did not receive appropriate response
(OIN/PIP/MCF/RTP/RTN) from the remote
party after sending the EOP signal to it
Line condition may be bad. Resend fax
466 Tx
NonĆECM
Received RTN signal from the remote
party after sending EOP signal to it
Line condition may be bad. Resend fax
467 Tx
NonĆECM
Received PIP signal from remote party afĆ
ter sending post message command of
EOP/PPSEOP/EOREOP signals to it. Then
T3" time passed. (Voice request function
is not available with HP 700/750 though.)
However, received image is good
Not an error. No action required
468 Tx
NonĆECM
Received PIP signal from the remote party
after sending post message command of
EOP/PPSEOP/EOREOP signals to it. Then
T3" time passed. (Voice request function
is not available with HP 700/750 though.)
However, received image is good
Not an error. No action required
469 Tx
NonĆECM
Received PIP/PIN signal from the remote
party after sending post message comĆ
mand of EOP/PPSEOP/EOREOP signal to
it. Within T3" time, received DIS from the
remote party
Not an error. No action required
470 Not used
471 Not used
472 Tx
NonĆECM
Received DCN command while in the subĆ
routine to wait for DTC/DIS command
Resend fax.