HP FACSIMILE MACHINE HP FAX-700 - Manual (Page 36)

Installation and Configuration 2Ć11
Paper Supply Tray Media Size Setting (HP FAX-900 and FAX-950)
In the FAX-700 and FAX-750 fax machines, the paper supply tray is adjusted for media size when the paper is loaded.
Refer to the procedure titled Loading Paper into the HP FAX-700 and FAX-750 Fax Machines.
In the FAX-900 and FAX-950, if the paper you plan to use does not fit properly in the paper supply tray, the paper
supply tray size setting must be adjusted before the paper is loaded.
To adjust the FAX-900 or FAX-950 paper supply tray for media size, perform the following procedure:
1. If the empty paper supply tray is installed in the fax machine, remove the paper supply tray cover (see
Figure 2-13) and continue with step 2. If the empty paper supply tray is not installed in the fax machine, re-
move the paper supply tray cover, and go to step 4.
Figure 2Ć13. Removing the Paper Supply Cover
FAX900–11
2. Press the snaps on the left and right sides of the tray in toward the center of the tray and hold them in while
performing step 3. See Figure 2-14.
Figure 2Ć14. Paper Supply Tray Retaining Snaps
FAX900–12