HP FIBRE CHANNEL TO SCSI ROUTER M8201R - Manual (Page 27)

M8201R Fibre Channel to SCSI Router Installation and User’s Guide — 529971-005
3 -1
3
Installing the Fibre Channel to SCSI
Router for the NonStop NS-Series
Server
This section includes:
Installation
1. Connect the small end of the SCSI cable to the Fibre Channel to SCSI router on
port 0. For the port location, see Figure 3-3 on page 3-3.
Installation 3-1
Note. In this example port 0 is being used to connect the tape drive. Both ports on the
Fibre Channel to SCSI router are available for use if needed.
Table 3-1. SCSI Cable Part Numbers and Descriptions
Product
Number Part
Number
Description
520-001 529794-001 CBA, 1 meter, VHDCI 68P to HD 68P, HVD SCSI Cable
520-003 529795-001 CBA, 3 meter, VHDCI 68P to HD 68P, HVD SCSI Cable
520-010 529796-001 CBA, 10 meter, VHDCI 68P to HD 68P, HVD SCSI Cable
520-015 529797-001 CBA, 15 meter, VHDCI 68P to HD 68P, HVD SCSI Cable
520-020 529798-001 CBA, 20 meter, VHDCI 68P to HD 68P, HVD SCSI Cable
520-023 529799-001 CBA, 23 meter, VHDCI 68P to HD 68P, HVD SCSI Cable