HP FIBRE CHANNEL TO SCSI ROUTER M8201R - Manual (Page 36)

Configuring the Fibre Channel to SCSI Router for
the NonStop NS-Series Server
M8201R Fibre Channel to SCSI Router Installation and User’s Guide — 529971-005
4 -2
Configuration
2. To start the tape drive on the server, issue this command in SCF:
SCF> START TAPE $tape
Example:
SCF> START TAPE $TAPE1
For complete details about the ADD and START commands, including command
syntax, see the SCF Reference Manual for the Storage Subsystem.
Figure 4-1. Rear View of the Fibre Channel Router
Note. WWN stands for worldwide name.
Note. WWP stands for worldwide port.
WWNN: 100000E00200F000
WWPN: 100000E00C00F000
ENET MAC ID: 00:E0:02:00:00:XY
WWN Name
WWP Name
Ethernet MAC ID
(Physical Address)