Figure 3-4, Front view of the tape drive, Figure 3-5 – HP FIBRE CHANNEL TO SCSI ROUTER M8201R User Manual
Page 30: Rear view of the tape drive
Advertising
Installing the Fibre Channel to SCSI Router for the
NonStop NS-Series Server
M8201R Fibre Channel to SCSI Router Installation and User’s Guide — 529971-005
3 -4
Installation
5. Connect the larger end of the SCSI cable to SCSI port 1 on the rear panel of the
tape drive. See
for the location.
Figure 3-4. Front View of the Tape Drive
Figure 3-5. Rear View of the Tape Drive
Note. Tape drives are preconfigured to SCSI ID 5.
Power Switch
AC Power Receptacle
Port 2
Port 1
Advertising