HP 4100GL - Manual (Page 32)

TACACS+ Authentication
Terminology Used in TACACS Applications:
Terminology Used in TACACS
Applications:
■ NAS (Network Access Server): This is an industry term for a
TACACS-aware device that communicates with a TACACS server for
authentication services. Some other terms you may see in literature
describing TACACS operation are communication server, remote
access server
, or terminal server. These terms apply to a Series
4100GL switches when TACACS+ is enabled on the switch (that is,
when the switch is TACACS-aware).
■ TACACS+ Server: The server or management station configured as
an access control server for TACACS-enabled devices. To use
TACACS+ with the Series 4100GL switches and any other TACACS
-
capable devices in your network, you must purchase, install, and
configure a TACACS+ server application on a networked server or
management station in the network. The TACACS+ server application
you install will provide various options for access control and access
notifications. For more on the TACACS+ services available to you,
see the documentation provided with the TACACS+ server applica
-
tion you will use.
■ Authentication: The process for granting user access to a device
through entry of a user name and password and comparison of this
username/password pair with previously stored username/password
data. Authentication also grants levels of access, depending on the
privileges assigned to a user name and password pair by a system
administrator.
• Local Authentication: This method uses username/password
pairs configured locally on the switch; one pair each for manager
-
level and operator-level access to the switch. You can assign local
usernames and passwords through the CLI or web browser inter
-
face. (Using the menu interface you can assign a local password,
but not a username.) Because this method assigns passwords to
the switch instead of to individuals who access the switch, you
must distribute the password information on each switch to
everyone who needs to access the switch, and you must configure
and manage password protection on a per-switch basis. (For
more on local authentication, see the password and username
information in the Configuration and Management Guide on the
Documentation CD-ROM shipped with your Series 4100GL
switches.)
2-4