HP 4100GL - Manual (Page 93)

Configuring Secure Shell (SSH)
Configuring the Switch for SSH Operation
Configuring the Switch for SSH
Operation
SSH-Related Commands in This Section Page
show ip ssh 4-17
show crypto client-public-key [keylist-str] [< babble | 4-25
fingerprint >]
show crypto host-public-key [< babble | fingerprint >] 4-14
show authentication
crypto key < generate | zeroize > ssh [rsa]
ip ssh
key-size < 512 | 768 | 1024 >
port < 1 - 65535|default >
timeout < 5 .. 120 >
version <1 | 2 | 1-or-2 >
aaa authentication ssh
login < local | tacacs | radius | public-key >
< local | none >
enable < tacacs | radius | local >
< local | none >
4-21
4-11
4-16
4-16
4-16
4-16
4-16
4-18, 4-19
4-18
4-18
4-18
copy tftp pub-key-file <tftp server IP> <public key file> 4-25
clear crypto client-public-key [ keylist-str] 4-25
1. Assigning a Local Login (Operator) and Enable
(Manager)
Password
At a minimum, HP recommends that you always assign at least a Manager
password to the switch. Otherwise, under some circumstances, anyone with
Telnet, web, or serial port access could modify the switch’s configuration.
To Configure Local Passwords. You can configure both the Operator and
Manager password with one command.
4-9