Husqvarna 15 C - Manual (Page 13)

English –
11
6004-001Hy 6021-001
6021-026
PRESENTATION
Presentation
Congratulation on your choice of a first-class quality
product.
Four models equipped with engines from Briggs &
Stratton are described in this operator’s manual.
Rider 11 and Rider 11 C has an in-line gearbox with
five forward gears and one reverse gear. On the Rider 13 C, Rider 13 AWD and Rider 15 C
the power transmission from the engine is handled
by a hydrostatic gearbox which enables stepless
variation of the speed.
Rider 13 AWD also features all wheel drive.
Location of the controls
1. Ignition lock
2. Throttle/Choke lever
3. Gear lever on 11 and 11 C
4. Adjustment of cutting height
5. Lifting lever, cutting unit
6. Speed control for reversing
(only on 13 C, 13 AWD and 15 C)
7. Speed limiter for driving forwards on
13 C, 13 AWD and 15 C
Parking brake on 11 and 11 C
8. Parking brake on 13 C, 13 AWD and 15 C
Clutch pedal on 11 and 11 C
9. Lock button for parking brake (left side on
13 C, 13 AWD and 15 C, right side on 11 and
11 C)
10. Seat adjustment
11. Fuel tank cap
12. Lever to disengage the driving front axle, 13 AWD
13. Main lock (under seat)
14. Lever for disengagement of drive
(only on 13 C and 15 C)
Lever to disengage the driving rear axle, 13 AWD