Husqvarna 15 C - Manual (Page 19)

English –
17
1
2
3
STOP START
1
2
3
6007-004H
6007-005H
6007-006
DRIVING
Cold engine:
4. Push the throttle control to position 3 (choke
position). In this position the engine receives a
richer mixture so that the engine starts more
easily.
The throttle must be moved to the side (towards
the ignition key) to reach the choke position.
IMPORTANT INFORMATION
Do not run the starter for more than about
15 seconds at a time. If the engine does
not start, wait about 10 seconds before
trying again.
6. Turn the ignition key to start position.
Warm engine:
5. Set the throttle control midway between position
1 and 2.