Maintenance, Adjustment of the throttle wire, Replacement of the fuel filter – Husqvarna 15 C User Manual

Page 32

Advertising
background image

30

– English

8009-402

8009-403

8009-404

8009-405

MAINTENANCE

Adjustment of the throttle wire

If the engine does not respond as it should when
the throttle lever is moved, or if it produces black
smoke or does not reach top speed, the throttle
wire may need adjusting.

1. Release the clamping screw (see arrow) and

push the throttle control to the choke position.

Replacement of the fuel filter

Replace the pipe fitted fuel filter every 100 running
hours (once per season) or more frequently if it is
clogged.

Replace the filter as follows:

1. Raise the engine cover.

2. Move the hose clips away from the filter. Use a

pair of flat pliers.

3. Pull off the filter from the hose ends.

4. Press in the new filter on the hose ends. If

necessary soap solution can be applied on the
filter ends to simplify fitting.

5. Push the hose clips back on the filter.

2. Pull the throttle wire’s outer casing to the far

right and check that the choke is fully activated.

3. Tighten the clamping screw.

4. Pull the throttle control back to the full throttle

position and check that the choke is no longer
activated.

Advertising
This manual is related to the following products: