Husqvarna 15 C - Manual (Page 28)

26
– English
8009-576
8009-577
2
11
3
1
8009-683
Inspecting the silencer
Check regularly that the silencer is complete and
secured correctly.
Temperature variations and vibrations can mean
that the tightening torque for the screws drops. The
screws should be checked when servicing to
guarantee the correct torque. The tightening torque
should be about 10 Nm. Never use a defective
silencer.
WARNING!
The muffler gets very hot in use
and remains so for a short time
afterwards. Contact can result in
burns. Remember the risk of fire.
MAINTENANCE
Left-hand fender
Release the screws in the fender and lift off the
fender.
Right-hand fender
Remove the screws (2 and 3) from the fender. On
the Rider 13 C, Rider 13 AWD and Rider 15 C the
knob (1) must also be removed.