Husqvarna 15 C - Manual (Page 31)

English –
29
MAINTENANCE
WARNING!
A poorly adjusted parking brake
can result in reduced braking
ability.
Adjusting the Parking Brake Rider 13 AWD
Check that the parking brake is adjusted correctly
by placing the machine on a slope with the front
and rear axles disengaged. Apply and lock the
parking brake. When the machine does not stand
still, the parking brake should be adjusted accord-
ing to the following.
1. Remove the left-hand wing cover.
2. Release the lock nuts (1).
3. Tension the wire with the adjusting screw (2)
until all the play in the wire is taken up.
4. Tighten the lock nuts (1).
5. On completion of the adjustment the brake
should be re-checked.
6. Assemble the left-hand wing cover.
8009-501
6021-031