Husqvarna 15 C - Manual (Page 49)

English –
47
TECHNICAL DATA
We reserve the right to change technical specifications without prior notice.
Note that no legal claims are valid on the basis of information in this manual.
Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.
Dimensions Rider 11 Rider 11 C
Length without unit - 2010 mm / 6.58 ft
Length with unit 2040 mm / 6.69 ft 2200 mm / 7.22 ft
Width without unit - 900 mm / 2.89 ft
Width with unit 960 mm / 3.15 ft 1114 mm / 3.65 ft
Height 1070 mm / 3.52 ft 1070 mm / 3.52 ft
Weight in working order
with unit
229 kg / 505 lb 229 kg / 505 lb
Wheel base 820 mm / 2.69 ft 855 mm / 2.8 ft
Track 610 mm / 2 ft 625 mm / 2.05 ft
Tyre size 165/60 - 8 165/60 - 8
Tyre pressure, front & rear 60 kPa (0,6 kp/cm 2 / 8.5 PSI) 60 kPa (0,6 kp/cm 2 / 8.5 PSI)
Max. gradient 15° 15°
Engine
Manufacture Briggs & Stratton / 215907011E1 Briggs & Stratton / 215907011E1
Power 7,7/10,5 kW/h.p. 7,7/10,5 kW/h.p.
Displacement 344 cm 3 344 cm 3
Fuel minimum 85 octane unleaded minimum 85 octane unleaded
Tank volume 7 litres / 7.4 USqt 7 litres / 7.4 USqt
Oil SAE 5W/30 or SAE 10W/30 SAE 5W/30 or SAE 10W/30
class SJ-CF class SJ-CF
Oil volume 1,4 litres 1.5 USqt 1,4 litres / 1.5 USqt
Start Electric starter Electric starter
Noise emissions and cutting width
Measured noise level 100 dB(A) 100 dB(A)
Guaranteed noise level 100 dB(A) 100 dB(A)
Cutting width 850 mm / 2.79 ft 940 mm / 3,08 ft
Electrical system
Type 12 V, negative earth 12 V, negative earth
Battery 12 V, 24 Ah 12 V, 24 Ah
Spark plug Champion QC12YC Champion QC12YC
electrode gap = 0,75 mm / 0.030" electrode gap = 0,75 mm / 0.030"
Main fuse 15 A Flat-blade mounting 15 A Flat-blade mounting
Transmission
Manufacture Peerless typ MST 205 Peerless typ MST 205
Oil SAE 10W/30, class SF–CC
No. of forward gears 5 5
No. of reverse gears 1 1
Speed in forward gears 1,85-8,9 km/h 0-9 km/h
Speed in reverse 0-3 km/h 0-3 km/h
Cutting unit
Type 3-blade unit with rear ejection 3-blade unit Combi 940 mm
Cutting height 9 pos. 40–90 mm / 1 9/16"-3 9/16" 9 pos. 40–90 mm / 1 9/16"-3 9/16"
Blade diameter 304 mm / 12" 360 mm / 14 3/16"