Hearth and Home Technologies Montana-36 - Manual (Page 16)

16 4039-150 Rev B 01/04
MONTANA INSTALLATION INSTRUCTIONS
11. Install the Chimney Air Kit
When installing the chimney air kit, follow the instructions
provided with this accessory.
Figure 17- Cooling Air Location
Note: The cooling air kit must terminate at least six
feet above ground level.
10. Install the Cooling Air Kit (furnished)
The cooling air kit is supplied as a standard feature
with this fireplace and is required for safe operation.
Installation must be done at the time of initial
construction. The cooling air inlet tubes must be a
minimum of 72” above the base of the fireplace. This
is to prevent potential blockage by snow or yard debris.
See Figure 17.
To install the air kit collar, slide one of the tabs down
into the seam. See Figure 18. Secure the collar tabs
to the fireplace with screws placed into the holes
provided. See Figure 19.
Repeat for the other side.
Figure 18 - Slide the Tabs
Figure 19 - Secure the Tabs