B. description of the fireplace system, A. listings and code approvals – Hearth and Home Technologies Montana-36 User Manual

Page 3

Advertising
background image

01/04

4039-150 Rev B

3

MONTANA INSTALLATION INSTRUCTIONS

WARNING!

This fireplace and its components are designed to be installed and operated as a system. Any alteration to or substitution

for items in this system, unless allowed by these installation instructions, will void the Underwriters Laboratories listing

and may void the product warranty. It may also create a hazardous installation. Read through these instructions thoroughly

before starting your installation and follow them carefully throughout your project.

1. The Heat-N-Glo fireplace system consists of the

following:

a. Fireplace/Integral Grate/Cooling Air System

b. Refractory

c. Chimney Termination Cap

d. Chimney System

e. Hearth Extension

2. Optional Components Include:

a. Glass Doors

b. Weather Cover

Note:

Illustrations used throughout these instructions reflect

“typical installations” and are for design purposes only. Actual

installation may vary slightly due to individual design prefer-

ences. However, minimum and maximum clearances must be

maintained at all times.
The illustrations and diagrams used throughout these installa-

tions instructions are not drawn to scale.

B. DESCRIPTION OF THE FIREPLACE SYSTEM

This fireplace system has been tested and listed in accordance

with UL 127 standards, and has been listed by Underwriters

Laboratories Inc. for installation and operation in the United States

as described in this manual.
This fireplace has been tested and listed for use with the optional

components listed on page 4. These optional components may

be purchased separately and installed at a later date. However,

installation of a dual cooling air kit is required and must be installed

at the time of the initial fireplace installation. Failure to do so may

result in a fire causing property damage and/or personal injury.

Check with your local building code agency prior to installing this

fireplace to ensure compliance with local codes, including the need

for permits and follow-up inspections. If you need assistance during

installation, please contact your local dealer or the Heat-N-Glo

LifeStyle Products Technical Services Department, Hearth & Home

Technologies Inc., 20802 Kensington Blvd., Lakeville, MN 55044,

phone 1-952-985-6000.

Figure 1 - Typical Fireplace System

A. LISTINGS AND CODE APPROVALS

Advertising