Honeywell CHRONOTERM IV T8624D - Manual (Page 7)

69-1074
7
T8624D CHRONOTHERM ® IV DELUXE ZONE MULTISTAGE THERMOSTAT
Table 3. Thermostat Installer Setup Options (Continued).
IMPORTANT
Review the settings to confirm that they match
the system. Press Run Program to exit the
Installer Setup. The thermostat has saved the
Installer Setup changes and initiated a reset in
order to operate with the new settings. Be sure to
set the current day and time immediately.
Setting Current Day and Time
ᕡ
Press Set Current Day/Time.
NOTE: On initial power up or after an extended
power loss, 1:00 pm flashes on the dispaly
until a key is pressed.
ᕢ Press Day until the current day is displayed.
NOTE: Sun=Sunday, Mon=Monday,
Tue=Tuesday, Wed=Wednesday,
Thu=Thursday, Fri=Friday, Sat=Saturday.
M10312
Time Set Program
System Fan
Run Program
Hold Temp
Set Current Day/Time
Set Current
Day/Time
Wake Leave Return Sleep
Day Heat/Cool Settings
Daylight Time Copy
Mon
PM
Set Day/Time
M10313
Time Set Program
System Fan
Run Program
Hold Temp
Set Current Day/Time Wake Leave Return Sleep
Day
Day
Heat/Cool Settings
Daylight Time Copy
PM
Tue
Set Day/Time
Installer
Setup Number
(Press Time
▲ key to Factory-Setting
Other Choices
(Press ▲ or ▼ key to change) Actual
Select
change)
Display Description Display Description
Setting
Minimum off time
for the
compressor 33 5 5 minute minimum off
time for the compressor 0 thru 4 Minimum number of minutes
(0 thru 5) the compressor will
be off between calls for the
compressor
Temperature
range stops in
heating 34 90 Highest setpoint
heating can be set to 40 to 89 Temperature range (1°F
increments) heating setpoint
can be set to
Temperature
range stops in
cooling 35 45 Lowest setpoint cooling
can be set to 46 to 99 Temperature range (1°F
increments) cooling setpoint
can be set to
Not used 36 — — — — —
Temperature
display
adjustment 37 0 No difference in
displayed temperature
and actual room
temperature 1 thru 6 1—Display adjusts to 1°F
higher than actual room
temperature
2—Display adjusts to 2°F
higher than actual room
temperature
3—Display adjusts to 3°F
higher than actual room
temperature
4—Display adjusts to 1°F
lower than actual room
temperature
5—Display adjusts to 2°F
lower than actual room
temperature
6—Display adjusts to 3°F
lower than actual room
temperature