Set the language and country/region, Set the front-panel view angle – HP 2170 User Manual
Page 53
reference guide
additional setup information
47
Note: You may also want to refer to the readme file for more information
on possible installation problems. On Windows, you can access the
readme file from the Start button on the taskbar; select Programs, Hewlett-
Packard, hp psc 2000 series, View the Readme File. On Macintosh, you
can access the readme file by double-clicking on the icon located in the top-
level folder of the HP PSC software CD-ROM.
set the language and country/region
Usually, the language and country or region are set when you install the
HP PSC. If you set the country/region or language incorrectly during
installation, use the following procedure.
1
Press Setup.
2
Press 2, then press 4.
This selects Maintenance, and then selects Set Language & Country/
Region.
You are prompted with a list of languages. You can also scroll through the
languages using
or
.
3
Using the keypad, enter the two-digit number for the desired language.
4
When prompted, press Enter for Yes or Cancel for No.
You are prompted with all the countries/regions for the selected
language. You can also scroll through the countries/regions using
or
.
5
Using the keypad, enter the two-digit number for the desired country/
region.
6
When prompted, press Enter for Yes or Cancel for No.
7
You can confirm the language and country/region by printing a Self-Test
Report, as follows:
a. Press Setup.
b. Press 1, then press 2.
This selects Print Report, and then selects Self-Test Report.
set the front-panel view angle
If you have difficulty seeing the text in the front-panel display, you may need to
change the view angle. The View Angle option lets you control the viewing
angle of the text in the front-panel display. You can change the angle so that it
displays text best when you view it from a standing position or from a seated
position.
1
Press Setup.
2
Press 2, then press 7.
This selects Maintenance, and then selects View Angle.
3
Press Enter, press
or
until the text in the front-panel display
appears as desired, then press Enter.