HP 2170 - Manual (Page 62)

hp psc 2170 series
chapter 9
56
energy consumption
Energy usage drops significantly while in Power Save mode, which saves natural
resources, and saves money without affecting the high performance of this product. This
product qualifies for ENERGY STAR®, which is a voluntary program established to
encourage the development of energy-efficient office products.
ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR
partner, HP has determined that this product meets ENERGY STAR guidelines for energy
efficiency.
For more information on ENERGY STAR guidelines, visit the following web site:
http://www.energystar.gov
paper use
This product is suited for the use of recycled paper according to DIN 19309.
plastics
Plastic parts over 25 grams are marked according to international standards that enhance
the ability to identify plastics for recycling purposes at the end of the product’s life.
material safety data sheets
Material safety data sheets (MSDS) can be obtained from the HP web site at:
http://www.hp.com/go/msds
If you are in the United States or Canada and do not have access to the Internet, call the
U.S. HP FIRST fax-on-demand service at (800) 231-9300. Use Index number 7 for a listing
of the material safety data sheets.
International customers without Internet access should call (404) 329-2009 for further
information.
recycling program
HP offers an increasing number of product return and recycling programs in many
countries/regions, as well as partnering with some of the largest electronic recycling
centers throughout the world. HP also conserves resources by refurbishing and reselling
some of its most popular products.
regulatory notices
The following sections are statements from various regulatory agencies.
FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specified
that the following notice be brought to the attention of users of this product.
Declaration of Conformity: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation. Class B limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there