Hp1050 fax, Mode (see, Auto mode – HP 1040 User Manual
Page 38
Additional features 32
Answer/receive mode
!
When no document is loaded, press the Ans.Mode/Contrast button until the desired
option displays.
HP1050 Fax
•
FAX
mode
•
In Ready mode,
FX
appears in the right hand corner of the
display.
•
When you get a call, the machine answers and receives the fax
automatically. When reception is complete, the machine returns to
Ready mode.
•
If you want to change the number of rings before it answers, see
•
AUTO
mode
•
In Ready mode,
AU
appears in the right hand corner of the
display.
•
When a call comes in, the machine answers it. If a fax is being
sent, the device receives the fax. If the machine does not sense a
fax signal, it will ring 5 times in a different tone to tell you it may be
a regular telephone call. If you do not pick up the handset it will try
again to receive a fax after several more rings.
•
If you want to change the number of rings before it answers, see
•
TAM
mode
You must have an answering machine attached to the EXT line socket
located on the bottom of your HP Fax.
•
In Ready mode,
TM
appears in the right hand corner of the
display.
•
When a call comes in, the answering machine answers and listens.
If it detects fax tones, it receives the fax; otherwise, it records the
caller’s message.
•
If you have set your machine to TAM Mode and your answering
machine is switched off or the answering machine is not connected
directly to your fax machine, the machine will automatically attempt
to receive a fax after several rings.
•
If your answering machine allows you to set the number of rings
before it answers the telephone, set the answering machine to
answer an incoming call in less than 4 rings.
•
When your answering machine answers an incoming call, it
records a fax tone until it realizes a fax is coming through. Due to
this, your answering machine may tell you a voice message has
been left, even when it is actually a fax.
•
TEL
mode
•
In Ready mode,
TL
appears in the right hand corner of the
display.
•
Automatic fax reception is turned off. You can receive a fax only by
lifting the handset and pressing Start/Enter.
How are you going to use your HP Fax?
Read about...
•
Telephone and fax with the integrated
answering machine in the Digital
Message Center.
TAM
•
Telephone and fax machine without the
answering machine.
AUTO mode