HP XU800 User Manual
Page 129
129
6 Tests and Error Messages
Error Message Summary
9
The BIOS Checksum value does not
match the value encoded in the BIOS.
Perform the following actions in this order:
1 Press
F2
to enter the Setup program, then
F9
to
load the default BIOS settings.
for instructions.
3 Flash the BIOS. Refer to
for instructions on
how to update the BIOS.
If the error still occurs, replace the system board.
10
The CMOS RAM has failed.
Perform the following actions in this order:
1 Press
F2
to enter the Setup program, then
F9
to
load the default BIOS settings.
for instructions.
3 Flash the BIOS. Refer to
for instructions on
how to update the BIOS.
If the error still occurs, replace the system board.
11
The cache memory test failed.
Replace the processor(s).
Number
of Beeps
Description
Action to Take...