Chapter 5. service, Tools required – HP A3312A User Manual
Page 97
91
Service
Chapter 5. Service
This chapter provides instructions for replacing storage system assemblies and parts. This chapter also
includes exploded views of deskside and rackmount storage systems, and part numbers for replaceable
parts.
WARNING! The procedures in this chapter should only be performed by a qualified
service representative. If you are not a qualified service representative, performing these
procedures may result in personal injury or loss of data.
CAUTION! Check with system administrator before powering down the system.
Tools Required
•
T10 Torx
driver
•
T15 Torx
driver
•
T25 Torx
driver
•
Large flat-bladed screwdriver
•
Small flat-bladed screwdriver (< 4 inches long, 0.25 inch wide)
•
3/8-inch nut driver
•
deep socket
•
nut driver
•
needle-nose pliers