HP QMS 4060 - Manual (Page 137)

Hard Disks
4-103 Printer Configuration
Formatting a Hard Disk
Use the Administration/Disk Operations/Format Disk menu to format
a hard disk.
Backing up a Hard Disk
Use the Administration/Disk Operations/Backup Hard Disk to backup
a hard disk.
Menu Administration/Disk Operations/Format Disk
Choices Dsk#0 - Dsk#4, Dsk#6, Dsk#7
Default Dsk#7
Notes Dsk#5 is reserved for the CrownCopy option. Dsk#7
belongs to the internal hard disk. This disk contains all
the printer system code and if formatted will cause the
printer to not function. Do not format Dsk#7 unless you
are troubleshooting a disk problem. See Chapter 9,
“Troubleshooting Printer Problems,” in the
Operations
manual for more information.
Refer to chapter 1, “Memory and Storage,” in the
Options manual for complete information on backing up
data to a Jaz or Zip Drive and restoring data from a Jaz
or Zip Drive.
Menu Administration/Disk Operations/Backup Hard Disk
Purpose Allows you to back up all the files stored on a storage device
Choices DSK7 Full, DSK7 Incremental
Default DSK#7 Full
Notes DSK#5 is reserved for the CrownCOpy option. Dsk#7 is the
internal hard disk.