HP QMS 4060 - Manual (Page 212)

Manual Notice
QMS 4060 Print System Reference D-2
Manual Notice
QMS, Inc. reserves the right to make changes to this manual and to
the equipment described herein without notice. Considerable effort
has been made to ensure that this manual is free of inaccuracies and
omissions. However, QMS, Inc. makes no warranty of any kind
including, but not limited to, any implied warranties of merchant-
ability and fitness for a particular purpose with regard to this
manual. QMS, Inc. assumes no responsibility for, or liability for, errors
contained in this manual or for incidental, special, or consequential
damages arising out of the furnishing of this manual, or the use of this
manual in operating the equipment, or in connection with the perfor-
mance of the equipment when so operated.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to
correct the interference at his own expense.
» Note: A shielded cable is required to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC rules.
▲ Caution: Any modifications or changes to this product not expressly
approved in writing by the manufacturer responsible for compliance to
Federal Regulations could void the user's authority to operate this
product within the Laws and Regulations of the Federal
Communications Commission.