HP QMS 4060 - Manual (Page 61)

Operator Control
Menu
4-27 Printer Configuration
Lower Inputbin
Use the Operator Control/Chain Option/Lower Chaining to chain to
the lower inputbin.
Middle Inputbin
Use the Operator Control/Chain Option/Middle Chaining to chain to
the middle inputbin.
Default On
Notes The Operator Control/Chain Option menu must be set
to On before the setting in this menu takes effect.
»Note: When making this selection, you may use
"LCIF," "LCIT," or "Optional" even though your printer
menu only displays "Optional."
Menu Operator Control/Chain Option/Lower Chaining
Choices On—Allow media to be pulled from the lower inputbin
if necessary.
Off—Don’t allow media to be pulled from the lower
inputbin.
Default On
Notes The Operator Control/Chain Option menu must be set
to On before the setting in this menu takes effect.
Menu Operator Control/Chain Option/Middle Chaining
Choices On—Allow media to be pulled from the middle
inputbin if necessary.
Off—Don’t allow media to be pulled from the middle
inputbin.