HP QMS 4060 - Manual (Page 148)

Halftones
QMS 4060 Print System Reference 5-6
Halftone Types
Your printer provides three different options for halftones—basic,
standard, and advanced. The number of gray levels increases by
increasing the halftone type setting and the printer resolution.
» Note: The default for this menu is Standard. The standard
settings are optimized for performance. The advanced settings
are optimized for quality.
A Special Note for QuarkXPress Users
Make sure you have installed the 4060 PDFs in the PDF folder in the
QuarkXPress folder. The name of the PDF is
n QMS4060.PDF
To select the PDF, go to the Page Setup dialog box in QuarkXPress,
and hold down the Shift key while clicking the Printer Type list box.
(The italicized selections are PPDs, and the non-italicized selections
are PDFs.) The PPD will allow you to access the halftone settings.
Enhanced Screening
To use enhanced (advanced) screening (or halftoning), do the
following:
In Your QuarkXPress Document (Page Setup Dialog Box)
n
In the Printer Type listbox select
QMS 4060 Print System
n If you have EFIcolor software loaded, select None .
n Select Use PDF Screen Values .
Standard Screening
To use standard screening (or halftoning), do the following:
In Your QuarkXPress Document (Page Setup Dialog Box)
n In the Printer Type listbox select
QMS 4060 Print System