HP A7818-IE002 - Manual (Page 149)

Installing Or Replacing Parts And Accessories
Replacing The System Fan
Chapter 6 149
Replacing The Rear Fan
NOTE Ensure that all cables are clear of the fan and will not easily come into contact with the
fan during normal use or following transportation.
1. The fan unit can only be installed in one way. The distance between the two
retaining clips is shorter at the top than the bottom. Align the fan clips with their
corresponding holes.
2. Gently push the fan downwards until it clicks into place.
3. Connect the fan connector to the CHASSIS_FAN socket on the system board.
4. Replace the workstation’s cover (refer to page 119). Reconnect all the power and
telecommunications cables.