Firmware hub (82802ab), Table – HP A7818-IE002 User Manual

Page 56

Advertising
background image

System Board

FirmWare Hub (82802AB)

Chapter 2

56

FirmWare Hub (82802AB)

The FWH (also known as flash memory) is connected to the LPC bus. It contains 4Mbit
(512KB) of flash memory.

The hardware features of the FWH include:

•

Random Number Generator (RNG)

•

Five General Purpose Inputs (GPI)

•

Register-based block locking

•

Hardware-based locking

An integrated combination of logic features and nonvolatile memory:

•

Enables better protection for the storage and update of system code and data.

•

Adds flexibility through additional GPIs.

•

Allows for quicker introduction of security/manageability features.

The following table outlines the available FWH features

Feature

Feature

•

Platform compatibility:

—

Enables security-enhanced platform
infrastructure

—

Part of the Intel I840 chipset

•

Two configurable interfaces:

—

FWH interface for system operation

—

Address/Address Multiplexed (A/A Mux)
interface

•

FWH interface mode:

—

Five signal communication interface supporting
x8 reads and writes

—

Register-based read and write protection for each
code/data storage blocks

—

Five additional GPIs for system design and
flexibility

—

A hardware RNG

—

Integrated Command User Interface (CUI) for
requesting access to locking, programming, and
erasing options. Also handles requests for data
residing in status, ID, and block lock registers.

—

Operates with 33MHz PCI clock and 3.3V I/O

•

4Mbits of flash memory for system code/data
nonvolatile storage:

—

Symmetrically blocked, 64KB memory
sections

—

Automated byte program and block erase
through an integrated Write State
Machine (WSM)

•

A/A Mux Interface/Mode, supporting:

—

11-pin multiplexed address and 8-pin data I/O
interface

—

Fast on-board or out-of-system programming

•

Power supply specifications:

—

Vcc: 3.3V +/- 0.3V

—

Vpp: 3.3V and 12V for fast programming,
80ns

Advertising