Hearth and Home Technologies A42CH EN - Manual (Page 43)

Heatilator • A36C & A42C • 28396 Rev Y • 10/06 43
Woodburning Termination Cap
Shroud
TS345 / 445
(Top Vent)
TR342 / 344
TR442 / 444
TR342 / 344 TV
TR442 / 444 TV
(with TR-TVK installed)
TR11 / 11T
TR11 / 11T TV
(with TR-TVK installed)
OPEN TOP with solid sides and 3 in. opening at the bottom.
Minimum Base Dimensions
(Inches)
23 X 23
28 X 28 with
Radiation Shield
26 X 26
32 X 32 with
Radiation
Shield
26 x 26
Minimum Top Dimensions
(Inches)
20 x 20 25 X 25 23 X 23 29 X 29 23 x 23
MAILBOX STYLE with open ends and 3 inch opening at the bottom of the sides.
Minimum Base Dimensions
(Inches)
N/A
26.5 X 28 with
Radiation Shield
28 X 30
34 X 34 with
Radiation
Shield
28 X 30 with
Radiation Shield or
34 X 34
Minimum Height (Inches) N/A 28 1/4 27 1/2 28 1/4 27 1/2
ROOFED STYLE with 12 X 22 (264 sq. in.) opening on each side and 3 in. space between the
radiation shield and chase top.
Minimum Base Dimensions
(Inches)
N/A
27 X 27 with
Radiation Shield
27 X 27 with
Radiation Shield
34 X 34 with
Radiation
Shield
34 X 34 with
Radiation Shield
Minimum Height (Inches) N/A 23 23 23 23
Minimum Height is measured from the bottom of the termination cap:
Minimum height is established with the bottom of the termination cap 7 in. above the chase top. Minimum height must increase
accordingly for any height above 7 in.