HP Photosmart 612 - Manual (Page 27)

Adjusting the camera settings 19
Adjusting the
camera settings
You can modify the camera settings to fit the current picture-taking
conditions and your preferences. For example, you can adjust the
flash settings to fit current lighting conditions. This chapter
describes how to:
use the flash.
change the image quality.
change the date and time.
change the language.
set the welcome screen.
Using the flash
The camera offers four flash settings. The current flash setting is
indicated by an icon on the status LCD. In addition, if the image
display is on, a message appears about the flash setting in the
status line.
Each time you turn the camera off and then on again, the flash
setting automatically reverts to
AUTO FLASH . If you change the
flash setting, it remains until you change it again or until you turn
the camera off and on.
.
Icon Message Description
AUTO FLASH The camera determines the need for a flash
based on lighting conditions. The flash setting
reverts to AUTO FLASH each time you turn the
camera on.
4
SwUG.book Page 19 Tuesday, September 25, 2001 1:30 PM