HP Photosmart 612 - Manual (Page 30)

HP photosmart 612 User Guide 22
To change the image quality
1 Turn on the camera.
2 Press the IMAGE QUALITY ( )
button repeatedly until the
quality level you want appears
on the status LCD.
Changing the date and time
The camera has a real-time clock that records the date and time at
which you take each picture.The camera prompts you to enter the
date and time under the following circumstances:
When you turn the camera on for the first time.
If the camera was without battery power (the batteries lost
power or were removed from the camera) for an extended
period of time.
Note For your convenience, the camera maintains the
date and time for at least 10 minutes after you
remove old batteries.
BETTER This setting produces high-quality
images and requires less memory
than
BEST mode. Use this setting
for taking pictures that you plan to
print 13 cm by 18 cm (5 by 7
inches) or smaller. This is the
default setting.
Digital zoom off:
1792 by 1200
Digital zoom on:
896 by 600
BEST Produces the highest-quality
images and uses the most
memory. Use this setting for taking
pictures that you plan to crop and
enlarge using image editing
software, or print 20 cm by 25 cm
(8 by 10 inches) or larger. Digital zoom off:
1792 by 1200
Digital zoom on:
896 by 600
Image quality Description Resolution
(in pixels)
image
quality
indicator
image
quality
button
SwUG.book Page 22 Tuesday, September 25, 2001 1:30 PM